Practical local know-how for life in Kent

Winter Home Checklist UK: Get Your Kent Home Ready

Roberto Bernadi avatar

What should be on your winter home checklist UK-wide before the cold really bites? Four jobs do most of the work: bleed the radiators, clear the gutters, get the boiler serviced and stop the draughts. None is difficult, and with a damp Kent winter on its way, it is worth doing them this month rather than in January.

How do you bleed a radiator?

You bleed a radiator by letting trapped air out through the small valve at the top corner, using a radiator key. Air collects over the year and leaves the top of the radiator cold while the bottom stays hot, which makes your boiler work harder for less heat.

  1. Turn the heating on, then check which radiators are cold at the top.
  2. Turn the heating off and let the system cool.
  3. Hold a cloth under the valve, and turn the key a quarter turn anticlockwise.
  4. Listen for the hiss. Close the valve as soon as water appears.
  5. Check the pressure gauge on a combi boiler. Most want roughly 1 to 2 bar when cold, but your boiler manual gives the right figure.

A radiator key costs a pound or two at a hardware shop. If the pressure has dropped, you can top it up using the filling loop, again following your manual. If a radiator is cold in the middle and hot at the edges, that points to sludge in the system rather than air, and that is a job for a heating engineer (a powerflush is often quoted at several hundred pounds).

Hand using a radiator key to bleed a radiator as part of a winter home checklist UK homeowners can follow
Photo by Zulfugar Karimov on Pexels

Do you need to clear your gutters before winter?

Yes, ideally once the autumn leaves have come down. Blocked gutters overflow, and water running down your walls can cause damp patches, stained brickwork and rot in fascias and soffits.

If you are comfortable on a ladder and the gutters are reachable, use a gloved hand or a plastic scoop, then flush with a hose and check the downpipe is running freely. Have someone foot the ladder, and never lean out sideways. For two-storey houses, or anything you cannot reach from a stable ladder, hire a professional. Gutter clearing for an average house typically costs somewhere between £70 and £150, though prices vary by property size and access, so get a couple of quotes.

While you are looking, check for sagging sections, cracked joints and plants growing out of the gutter. Repairs now are cheaper than repairs after a storm.

When should you get your boiler serviced?

Book the boiler service before the first properly cold week, because engineers get busy from October onwards. A service is normally once a year, and many manufacturers require it to keep the warranty valid.

A standard gas boiler service in the UK commonly costs around £70 to £120, depending on where you live and the engineer. For that you should get the engineer to check the flue, burner, pressure and safety devices, and to test for leaks. Always ask to see their Gas Safe ID card, and check them on the Gas Safe Register.

If you are a landlord, a gas safety check every 12 months is a legal requirement, and tenants must get a copy of the certificate.

When must you call a Gas Safe engineer?

Call a Gas Safe registered engineer for anything involving gas appliances or pipework, including boilers, gas fires and cookers. It is illegal for anyone not on the register to carry out gas work, and it is not a DIY area, however many videos you have watched.

Get one out if you notice any of the following:

  • The boiler is making banging, whistling or gurgling noises.
  • The pilot light keeps going out, or the flame is yellow or orange rather than blue.
  • There are black marks or staining around the boiler.
  • Radiators stay cold even after bleeding and the pressure is correct.
  • The boiler keeps losing pressure.

If you smell gas or suspect a leak, open the windows, turn off the gas at the meter if you can do so safely, avoid switches and naked flames, and call the National Gas Emergency Service on 0800 111 999. Also make sure you have a working carbon monoxide alarm, because the gas cannot be seen or smelt.

What is the cheapest way to draught-proof a house?

The cheapest way to draught-proof a house is to seal the obvious gaps around doors, windows, letterboxes and keyholes with self-adhesive foam or brush strips. A set of materials for a whole house is often well under £50, and fitting them takes an afternoon.

Start with the places you can feel cold air. On a windy day, hold the back of your hand near window frames, the letterbox and the bottom of external doors. Then work through this list:

  • Door bottoms: a brush or draught excluder strip.
  • Letterbox: a brush or flap fitted to the inside.
  • Keyholes: a simple cover.
  • Window frames: adhesive foam or rubber seals where sashes meet.
  • Gaps between skirting boards and floors: flexible sealant.
  • Loft hatch: a seal around the edge of the hatch.

Do not block air bricks, wall vents or extractor fans. Older Kent homes, such as Victorian terraces and cottages, need ventilation to keep damp away, and rooms with gas appliances must keep their vents clear. The Energy Saving Trust publishes good general advice on draught-proofing if you want to go further.

What else is worth doing before the cold arrives?

Three small jobs are worth adding. Find your stopcock and check that it turns, so you can shut the water off fast if a pipe bursts. Lag exposed pipes in the loft, garage and outbuildings. And if you will be away over the winter, leave the heating on a low setting so the house stays above freezing.

Do the radiators and boiler first, since they affect your comfort and your bills most. Then pick a dry weekend for the gutters, and finish with the draught-proofing.

Frequently Asked Questions

How often should you bleed your radiators?

Once a year before winter is enough for most homes. Bleed them again if you notice cold patches at the top of a radiator or hear gurgling. If you need to do it often, ask an engineer to check for a leak or corrosion.

Is a boiler service a legal requirement?

For owner-occupiers it is not a legal requirement, but annual servicing is strongly recommended and often needed to keep the warranty valid. Landlords must arrange a gas safety check every 12 months and give tenants the certificate.

How do I check that an engineer is Gas Safe registered?

Ask to see their Gas Safe ID card and check the licence number on the Gas Safe Register website. The card also shows which types of gas work they are qualified to do. If they cannot show one, don’t let them touch your appliances.

Can I clear my gutters myself?

You can if they are reachable from a stable ladder and you feel confident. Wear gloves, have someone foot the ladder and don’t overreach. For second-storey gutters or awkward access, hiring a professional is safer.

What pressure should my combi boiler be at?

Most combi boilers need around 1 to 2 bar when the system is cold, but the exact figure depends on the model, so check your manual. If it keeps dropping, don’t keep topping it up. Call a Gas Safe engineer to find the cause.

More for Kent

One response to “Winter Home Checklist UK: Get Your Kent Home Ready”

  1. […] and roles as they come up. If you’re also getting the house ready for the colder months, our winter home checklist for Kent is a good way to use the dark evenings before you start on the […]

Leave a Reply

Your email address will not be published. Required fields are marked *